Aluminum siding mostly disappeared from new construction decades ago, and vinyl took over as the default budget material because it costs less to install and comes in far more colors and profiles than aluminum ever offered. That said, aluminum still shows up on plenty of Holliday Park homes built from the 1960s through the 1980s, and it isn't automatically wrong to keep or repair it. Whether it still makes sense for your house depends on its current condition and how much you value low maintenance over the original material.
Why Aluminum Faded From New Construction
Aluminum siding had a real run of popularity because it doesn't rot or feed insects, and it holds paint reasonably well when it's properly finished. Vinyl caught up on durability by the 1980s and then pulled ahead on price, since it's cheaper to manufacture and doesn't require the same gauge of metal or labor to install correctly. Vinyl also expanded into far more colors and panel profiles over the following decades, while aluminum's color and style options stayed comparatively limited. By the time fiber cement arrived as a third option with even better durability, aluminum had lost its case on nearly every front except one. It genuinely does not burn or rot, which still matters to a smaller group of homeowners today. It's worth noting that vinyl itself is not one uniform product, which surprises some homeowners comparing quotes. Builder grade vinyl runs thin, sometimes described by its gauge thickness, and it can ripple in direct sun, a problem installers call oil canning, or crack more easily in a cold snap than a heavier, thicker panel does. Premium vinyl with a thicker gauge and sometimes a foam backing costs more per square foot but resists that rippling and holds up to impact noticeably better, which closes some of the durability gap that used to favor aluminum on paper.
A Failure Mode Worth Knowing About: Reflected Heat
There's one failure mode that catches homeowners off guard, and it has nothing to do with storms or age. Modern energy efficient windows, especially on a neighboring house or even your own, can reflect enough concentrated sunlight to warp or melt vinyl siding on a nearby wall, a problem aluminum simply does not have since metal does not soften under heat the way vinyl can. It is not common, but it shows up often enough in newer subdivisions with a lot of low emissivity glass facing back toward a side yard that it is worth mentioning to anyone replacing siding near a home with updated windows nearby. If you notice warping only in one small area rather than across a whole wall, reflected heat is worth ruling out before assuming it is a manufacturing defect or an installation problem.
What Most Holliday Park Homeowners Choose Instead
When Holliday Park homeowners do decide to replace aluminum siding, most land on either vinyl or fiber cement depending on budget and how long they plan to stay in the house. Our post on what siding replacement costs in Holliday Park in 2026 covers full project numbers across materials if you're comparing more than just aluminum and vinyl. Holliday Park Siding Company frequently points homeowners who want the noncombustible, dent resistant qualities that drew them to aluminum in the first place toward fiber cement instead, and our post on what Hardie board siding costs in Holliday Park is a good next stop. Our James Hardie siding installation service can also walk you through how that material compares directly to what's already on your house.
Cost Comparison for Holliday Park Homeowners Today
Aluminum siding is harder to find installed new in 2026, and that scarcity actually pushes the material cost up rather than down, since fewer suppliers stock it and fewer crews install it regularly. Vinyl remains the cheapest common option by a comfortable margin. Holliday Park Siding Company occasionally quotes aluminum repair work on existing homes, but full aluminum replacement jobs are rare enough that pricing them out mostly serves as a comparison point rather than a live recommendation. Here's how the typical 2026 midwest numbers compare for a Holliday Park home:
| Material | Typical 2026 Installed Cost Per Sq Ft | Expected Lifespan |
|---|---|---|
| Aluminum | $6 to $11 | 30 to 40 years with upkeep |
| Vinyl | $4 to $9 | 20 to 40 years |
Aluminum can technically last longer than vinyl on paper, but that lifespan assumes regular repainting and dent repair, costs that vinyl mostly avoids since it doesn't need painting at all. Once you fold those upkeep costs back in, the total cost of ownership usually favors vinyl over the life of the siding. Home size affects this comparison too. A smaller ranch might only need a few squares of aluminum repair to stay serviceable a while longer, keeping the project small and inexpensive, while a larger two story aluminum home nearing the end of its finish life often makes more sense as a full replacement, since scaffolding and staging costs get spread across more total wall area either way. Budget conscious homeowners sometimes choose builder grade vinyl to keep the project affordable now, while those planning to stay long term more often step up to a thicker panel or move straight to fiber cement instead.
Where Aluminum Still Makes Sense
If your existing aluminum siding is in good shape with only minor dents or fading, a repair and repaint can be the most cost effective move rather than tearing off perfectly serviceable material. Aluminum also still gets specified in some commercial and fire conscious applications where its noncombustible properties matter more than color options or dent resistance. For a typical single family home in otherwise good repair, keeping aluminum a while longer and budgeting for eventual replacement down the road is a completely reasonable plan rather than something to rush into this season. Timing a repaint on existing aluminum also matters. Paint bonds best to aluminum in the same moderate temperature and humidity range that works for most exterior coatings, so spring and fall remain the best windows in Holliday Park for that kind of touch up work, and rushing a repaint into a hot, humid stretch of summer can leave the new coat prone to peeling sooner than it should.
Dents and Noise: Aluminum's Real Drawbacks
Aluminum dents. A dropped ladder or a stray hailstone leaves a permanent mark that can't be popped back out the way some other materials shrug off minor impacts. Once the factory finish starts chalking, which is a powdery fading that happens over time, repainting is really the only fix, and paint doesn't always bond evenly to older aluminum. Rain and hail are also noticeably louder against aluminum than against vinyl or fiber cement, which is a small thing until you're sitting in a room during a spring storm listening to it drum overhead. None of these issues make aluminum unsafe or nonfunctional. They just add up to reasons most Holliday Park homeowners move away from it once they're already paying for a full replacement anyway. Vinyl has its own slow failure mode worth understanding, even though it skips the dent and chalk problems aluminum has. Ultraviolet light breaks down the plastic over years of exposure, and once a panel gets brittle enough, a cold snap can crack it in a way that would have just flexed a newer panel. South and west facing walls fade and go brittle faster than shaded elevations, which is why a wall replaced in isolation years after the rest of the house sometimes ages at a visibly different rate.
Older Homes and What's Behind the Aluminum
Homes from the aluminum siding era often have something worth knowing about before a tear off begins. Some homes built in that same general period used older insulation board or trim materials that can contain asbestos, which is not dangerous if left undisturbed but does change how a crew needs to handle removal and disposal once the old siding starts coming off. A good contractor checks for this before pulling the first panel rather than after, since it changes both the timeline and the cost if testing turns up something that needs special handling. None of this is common, and most aluminum tear offs proceed exactly like any other siding job, but it is one more reason an experienced local crew is worth more than the lowest bid on an older home.